Vaping is one of the most popular and convenient methods for enjoying oil distillates. If you have a supply of distillate you’re either going to use a dab rig to consume it or a vape cartridge. However, you might be wondering how exactly do you get the distillate in the cartridge in the first place?
No worries, it’s actually a very simple process that doesn’t take very long. Whether you’re someone just looking to fill their own personal cartridges, or you’re looking to mass produce many cartridges for distribution, we’ll show you the general principles of how it all works.
What You’ll Need
- Distillate Oil
- Heat Source
- Filler Machine
Lucky for us all, filling vape cartridges is often done by hand or small machines that just about anybody can use. To fill one vape cartridge with distillate you’ll pretty much just need the oil itself, the cartridge, a syringe, and a heat source.
The syringe will be for injecting the distillate into the cartridge reservoir and the heat source makes the distillate more fluid to make it easier to inject. Most cartridge filler machines act as both a heat source and an injection syringe and they can make the filling process much faster than a single syringe. But if you’re only filling your own, you probably won’t need one.
Terpenes are special additions you can add to your distillates to give it back the aromas and flavors that were lost during the distillate extraction process.
1. Unscrew your cartridge to get to the empty tank, most 510 threaded CCell and Liberty cartridges can be disassembled by twisting the components.
2. Warm your distillate. There’s many ways to warm your distillate, depending on the viscosity of it will be how much heat you’ll want to apply to it. The whole point of heating your distillate is get it into a more fluid liquid form.
Don’t go too hot, you can warm your distillate with indirect heat until it becomes easy to take in with your syringe. If you have cartridge filler machine, you should have the option to adjust the temperature of the oil within. Temperatures of around 100-140 degrees Fahrenheit are most common but will ultimately depend on your distillate.
Once your distillate has reached your desired fluidity, you can add your terpenes. The amount to add is usually anywhere from 5% to 15% of the amount of distillate you’re using, so a little goes a long way. Your terpenes will also affect the viscosity of the oil as well. The more terpenes, the thinner your oil will come out. Stir the mixture to get an even distribution.
3. Once your distillate has been heated to a liquid form, you can extract the oil into your syringe and then inject it into the reservoir of your cartridge. If you’re having a lot of trouble, your oil may not be hot enough yet or not enough terpenes.
If you’re using a cartridge filling machine, you can pour your oil into the device and adjust the shot settings to the specific amount you would like for each cartridge. You can then inject the oil the same way you would with a syringe but a button will activate the shot instead and you’ll have the perfect amount.
4. Once your cartridge is filled, you can cap them off with the same plastic caps they come with or seal it with a mouth piece. We recommend waiting about 12-24 hours to let the oil settle in and soak into the coils. After that, you’re done! You now have a perfectly usable oil distillate cartridge ready for vaping.
Filling distillate cartridges is relatively easy once you get the hang of it. We generally do not recommend reusing cartridges as they were made only to be used one time around and this can become wasteful of your oil as well as dangerous.
Hopefully, this tutorial helped you out in filling your distillate oil cartridges. CoolJarz specializes in tools for dispensaries and manufacturers in the vape cartridge industry. If you’re looking to get a semi-automatic vape cartridge filling machine to ramp up production, click here! If you’re interested any other dispensary products, check out the rest of our website!
If you have any questions about anything, feel free to Contact Us! We’ll be happy to help!