Cartridge Filling Machine

How To Fill a THC Oil Concentrate Cartridge Yourself

THC oil concentrates are one of the most popular and convenient methods for enjoying cannabis. If you have a THC oil concentrate, you’re either going to dab, ingest, or vape it. Since vaping seems to be one of the most convenient and popular ways of consuming concentrates, we figure letting everyone know how to fill their own cartridges might be beneficial knowledge.

It’s actually a very simple process that doesn’t take very long. Whether you’re someone just looking to fill their own carts, or you’re looking to mass produce many cartridges for distribution, we’ll show you each way so this tutorial can be used by anybody.

What You’ll Need

Supplies

THC Oil Concentrate
Cartridges
Syringe
Heat Source

Options

Terpenes
Vape Pen Filler Machine

Easily enough, filling cartridges is often done by hand or small machines that just about anyone can use. To fill one vaporizer cartridge with THC oil, you’ll pretty much just need the concentrate itself, the vape cartridge, a syringe, and a heat source.

The syringe will be for injecting the distillate into the cartridge reservoir and the heat source makes the distillate more fluid to make it easier to inject. Most oil cartridge filler machines act as both a heat source and an injection syringe and they can make the filling process much faster than a single syringe. But if you’re only filling your own, you probably won’t need one.

Terpenes are special additions you can add to distillate concentrates to give it back the aromas and flavors that were lost during the distillate extraction process. They can also loosen up thicker oils if needed. If you’re using a distillate, this is highly recommended.

Instructions

Unscrew your cartridge to get to the empty tank, most 510 threaded CCell and Liberty cartridges can be disassembled by twisting the components.

2. Warm your oil concentrate. There’s many ways to warm your concentrate from hot plates to filling machines. The viscosity of the oil will determine how much heat you’ll want to apply to it. The whole point of heating your oil is get it into a more fluid liquid form. For the most accuracy, a filler machine will likely be your best option.

Don’t go too hot, you can warm your distillate with indirect heat until it becomes easy to take in with your syringe. If you have cartridge filler machine, you should have the option to adjust the temperature of the oil within. Temperatures of around 100-140 degrees Fahrenheit are most common but will ultimately depend on your distillate.

Once your distillate has become a bit less viscous, you can add your terpenes. The amount to add is usually anywhere from 5% to 15% of the amount of distillate you’re using, so a little goes a long way. Your terpenes will also affect the viscosity of the oil as well. The more terpenes, the thinner your oil will come out. Stir the mixture to get an even distribution.

3. Once your distillate has been heated to a liquid form, you can extract the oil into your syringe and then inject it into the reservoir of your cartridge. If you’re having a lot of trouble, your oil may not be hot enough yet or not enough terpenes.

If you’re using a vape pen cartridge filling machine, you can pour your oil into the device and adjust the shot settings to the specific amount you would like for each cartridge. You can then inject the oil the same way you would with a syringe but a button or foot pedal will activate the shot instead and you’ll have the perfect amount. Most cartridges will either hold .5ml or 1ml of oil.

4. Once your cartridge is filled, you can cap them off with the same plastic caps they come with or seal it with a mouth piece. We recommend waiting about 12-24 hours to let the oil settle in and soak into the coils. After that, you’re done! You now have a perfectly usable oil distillate cartridge ready for vaping.

Conclusion

Filling distillate vape pen cartridges is relatively easy once you get the hang of it. We generally do not recommend reusing cartridges as they were made only to be used one time around and can break. This can become wasteful of your oil as well as dangerous.

Hopefully, this tutorial helped you out in filling your vape pen distillate cartridges. CoolJarz specializes in tools for dispensaries and manufacturers in the vape cartridge industry. If you’re looking to get a semi-automatic vape cartridge dispensing machine to ramp up production, click here! If you’re interested any other dispensary products, check out the rest of our website!

If you have any questions about anything, feel free to Contact Us! We’ll be happy to help!

What are CO2 Oil Cartridges?

CO2 cartridges are named after the CO2 extraction process that produces the oil they contain. For many, CO2 cartridges have become the gold standard of vape cartridges due to their purity and potency. (via. Klover)

CO2 oils can retain moderate levels of natural terpenes, meaning they contain much of cannabis’s natural flavor and aroma even after being processed. By comparison, concentrates like distillate have been processed to the point that they contain practically no natural flavors and must instead be infused with artificial ones.

How is CO2 Oil Made?

To make CO2 oil, concentrate makers manipulate temperature and pressure to turn CO2 into a liquid. Cannabis plant material is then soaked in the liquid, which chemically strips cannabinoids and terpenes out of the plant matter. After this process is complete, the plant matter is removed from the solution.

From there, the concentrate maker again manipulates pressure and temperature to turn the CO2 back into a gas. When the gas evaporates away, it leaves behind a concentrated substance comprised almost entirely of cannabinoids and terpenes.

The final product is a concentrate filled with natural flavors, much different from your usual distillate.

CO2 Oil For Vape Carts

CO2 Oil vape cartridges are gaining popularity amongst many vape pen users. The combination of moderate terpene flavors, aroma, and THC levels create which create an overall experience while vaping often referred to as the “entourage effect”. CO2 oil cartridges won’t always have the highest THC content but the added attributes more than make up for it for many.

So much so that, CO2 oil cartridges are often sold more expensively than many other oil cartridges. At the moment, CO2 Oil cartridges are seen as a slight luxury item amongst many cannabis connoisseurs due to the unique experience but aren’t much more expensive than other distillate cartridges.

CO2 Oil Cartridge Filler

CO2 oil concentrate consistencies are very similar to other concentrates and can come in forms similar everywhere from a thick honey to a solid shatter or badder. The closer to a liquid form, the easier it will be to add into your vape cartridges although they may need to be diluted if too thick.

CoolJarz has a CO2 oil cartridge filler machine that can easily fill CO2 oil with viscosities as high as honey. Known as the HotShot 1500, this cartridge filler machine can fill thousands of CO2 oil cartridges within a single day.

The key to filling CO2 oil is control. With the HotShot 1500, you’ll be able to adjust the temperature of your oil up to 170 degrees Fahrenheit and can easily adjust to lower levels as not to burn your terps and terpenes.

The HotShot is also capable of filling the perfect amount per shot with the click of a button. This allows users to fill about 50 CO2 oil cartridges within 2 minutes. Not bad, and now picture how many you could fill within a single day.

Conclusion

CO2 is a relatively new cannabis byproduct that has definitely become popular amongst users of all kinds due to the unique experience when consuming it. For those who really enjoy the natural flavors and aromas of cannabis, live resin cartridges might be the perfect choice for you.

CoolJarz are experts in cannabis cartridges and packaging. If you’re a cannabis company looking for a cartridge filler for your live resin carts, CoolJarz’s HotShot 1500 may be your answer. If you have any questions about CoolJarz products Contact Us! We’ll be happy to help!

The Customizable Cartridge Filler Machine

With so many different sizes and types of Cannabis Oil cartridges, it can be difficult to know whether a certain cartridge filling machine is suited to fill the specific type of cartridge you have. This is even more important when you have multiple sizes or types to sell.

The solution to finding a cartridge filler that will work best for you is either, finding the one that already has all your needs pre-set. Or a customizable cartridge filler machine that can work with all types of cartridges. If you’re looking for the latter, and even the former, you’ll want to checkout CoolJarz HotShot 1500 cartridge filling machine to perfectly fill your cartridges or pods.

Customizable Settings Filler Machine

If you’ve ever attempted filling oil cartridges before you probably know just how tedious the task can be without the proper equipment. This is the worst case with manual filling methods that leave the measuring and dispensing all up to user error.

It’s hard getting the perfect amount each time filling with a syringe. Even when you are getting pretty close to the amounts you want in each cartridge each time, it takes forever to do. This isn’t a problem when you start to automate some things.

Automated Shot Sizes

Automating amounts dispersed and the dispersing itself is an easy way to speed up the process and provide accurate amounts each time. However, the problem many times with automation is that you want a little bit of control to better fir your needs. A filling machine that automatically fills 1ml shots is useless if you’re using .5ml cartridges.

That’s why customizable and adjustable settings are so important for cartridge fillers. Filling machines like the CoolJarz HotShot 1500 are capable of setting the amount you wish to disperse per tick down to the .01 ml. These customizable shot sizes go anywhere from .33ml to 1.5ml. Need to change cartridge sizes? You can simply adjust the shot size through the touchscreen menu of the HotShot cartridge filler.

Multiple Viscosity Settings

The same goes for different oil viscosities. The HotShot 1500 vape cartridge filling machine had three different settings when it comes to the oil viscosity you use, for a smoother disperse. This includes oils with viscosities closest to either olive oil, glycerin, or as thick as honey. It’s nice to have options when it comes to cartridge fillers, choose the most versatile one.

How Well Does Our HotShot Oil Filler Work?

The CoolJarz HotShot cartridge filler can definitely amp up your production in terms of speed. With our cartridge filler, you’d be able to fill up to 50 cartridges in a couple minutes. Spend a single workday with those speeds and you’re filling over 10,000 cartridges by the end of it.

These are consistent shots as well. After adjusting the amounts dispersed to perfectly fit your cartridge, you’re getting the same pour each time you click that button. No more hoping and guessing you’ve added too little or too much to each cartridge.

The automation of the HotShot’s filling system, mixed with your own pace leads to production levels you never thought possible, leading to an inexpensive cost of production. Our semi-automatic cartridge filler machines are the best on the market for streamlining your cartridge business, here’s where to get them.

Buying Filling Machines & Vape Hardware From CoolJarz

CoolJarz was able to create a device so in tuned with our customer base only because we are constantly looking to provide solutions to those in the cannabis industry.

Our team of engineers have created everything from packaging for pre-roll tubes, to machines that allow cannabis companies to brand their products more easily. We are the manufacturer of these products and we make them right here in the USA. So, it just makes sense to be experts in this as well.

Compatible

Our semi-automatic cartridge filling machine will work with just about any vape cartridge we know of. This includes popular types such as 510 threaded cartridges, or Pax Era pods as well. Other notable brands such as CCell can easily be filled with our cartridge filler machine.

The HotShot 1500 is capable of dispensing oils with viscosities anywhere from olive oil to thicker viscosities such as honey. The power of our equipment provides its users versatility in ways other cartridge fillers can’t.

Efficient

When we say efficiency, we mean it in every step of the cartridge filling process. With one of the lowest travels between our oil reservoir and filling needle, our filler machine uses one of the lowest amount of wasted material when used.

Many automatic filler machines have long tubes often a couple feet away from their filling needle. This causes backups to occur, and suddenly the material is unusable. With the HotShot, you’re using almost every drop of oil where it’s intended, in your cartridges.

The Customizable Cartridge Filler Machine Conclusion

CoolJarz is one of the leading suppliers of semi-automatic vape cartridge fillers on the market and we’re experts in other aspects of cannabis packaging as well. If you’re looking to get a HotShot 1500 cartridge filling machine, click here!

Have any questions about our vape cartridge filler machine or about CoolJarz in general? Contact Us! We’ll be happy to help!

The Best Cartridge Filler for Protecting Terpenes

Terpenes, also known as terpenoids, or terps, are compounds produced in the flower and leaves of the cannabis plant. (via shopbotanist) In today’s age many take in consideration the terpene content of cannabis almost as much as the potency of THC and CBD in a strain.

However, when creating cannabis concentrates terpenes are constantly in danger of being eliminated and are sometimes completely lost. This is because terpenes are a fragile element of cannabis and many extraction methods inadvertently remove terpenes from the mix.

This goes the same for filling cartridges as well. Many cartridge fillers are unable to protect terpenes due to a lack of control but we’ll get into that later. Here’s we’ll discuss why terpenes are important and how to get an oil cartridge machine that keeps them intact.

What Are Terpenes?

Terpenes are the primary elements of the essential oils in plants. They account for the cannabis plant’s flavor and aroma. Cannabis strains are often defined based on their terpenes. Name’s like Tangerine Dream and Super Lemon Haze are all based on the smell and taste attributed by terpenes.

Terpenes don’t just account for the aroma and taste however. Terpenes often combined with the other cannabinoids in cannabis create what has been known as “The Entourage Effect.” This effect is often described as a sensation formed from the synergy of all the different compounds when consuming cannabis. Many users prefer strains that can best make use of this effect so you can understand why protecting terpenes is so important.

How Do Terpenes Get Removed?

During the extraction process, for many oils and distillates, terpenes are lost usually in the pursuit of higher THC levels but the two aren’t mutually exclusive to one another. It’s possible to get high THC levels and keep your terpenes intact with the correct extraction and filling methods.

Oil concentrates like distillates have had all of their other cannabinoids and terpenes removed and separated in the extraction process to form a stronger concentration of THC. However, many distillate manufacturers will re-add terpenes to determine the final aroma and taste of the their products. These terpenes are either derived naturally or created artificially as you would expect with any type of flavoring.

Concentrates such as Live Resin are able to keep just about all of their natural terpenes in the extraction process because the plants used have been flash frozen to preserve them. Making sure terpenes aren’t lost in live resin is extremely important to end users because they’re most likely paying a bit more for them.

Speaking of which, temperature is one of the most important factors in whether terpenes are lost in the cannabis oil vaping process. When vaping cannabis oils, you’re usually missing out on flavor with the higher the temperature you vaporize your oils. This is because the terpenes are getting burnt in the process!

This is also possible during the heating process when filling cannabis oil cartridges. Many fillers will heat the oils too high and end up ruining the terpenes. This is why you need to be careful with how you fill your oil cartridges.

A Cartridge Filler for Protecting Terpenes

Considering terpenes are often loss due to high heats, CoolJarz has created a cartridge filling machine that gives you complete control of how hot your oils can get with the HotShot 1500 cartridge filler machine.

The HotShot is able to control temperatures with half-degree accuracy all the way up 170 degrees Fahrenheit. This means precision heating for your oils, exactly the way you want them.

This is including a wide range of oil viscosities that may be too difficult for many other cartridge fillers on the market. The HotShot 1500 is capable of handling oil viscosities anywhere from olive oil, glycerine, all the way up to Honey.

This is because of the power that the HotShot is able to put out to dispense thicker oils at lower temperatures, all without the need for an outside pump.

Conclusion

Terpenes can be extremely important to cannabis oil cartridges as the flavors and aromas they produce often define the oil themselves. If your customers are looking for specific terpenes in their concentrates, don’t destroy them!

To maintain the terpenes in your cannabis oil, use a cartridge filler machine that allows you to control your temperatures, and can dispense higher viscosities at lower temps. You can do this with the HotShot 1500 cartridge filler machine.

For more information about CoolJarz HotShot, or cannabis packaging in general, visit CoolJarz.com or Contact Us! We’ll be happy to help!

What Viscosities Mean For Filling Cannabis Oil Cartridges

The term “Viscosity” comes up quite often when it comes to cannabis oils, concentrates, and cartridges. However, you may be wondering what exactly does viscosity mean and why is it so important to cannabis oil.

Well, Viscosity is defined by Oxford Languages as “the state of being thick, sticky, and semifluid in consistency, due to internal friction.” Something with a high viscosity is often said to be thicker than that of something with a low viscosity. You can already imagine how important this is for cannabis so let’s go into detail.

Viscosity in Cannabis Oils

Viscosity is mentioned often when it comes to cannabis oils because many will often grade higher viscosity oils as more potent than low viscosity as well as many other benefits. However, high viscosity oils may be favored by many , they are also more difficult to vaporize.

High viscosity oils are more solid than lower viscosity oils and are therefore more difficult to fit into an oil cartridge efficiently. This is obviously because many syringes won’t be able to work with an oil that is too thick. However, to temporarily lower the viscosities of these concentrates, we use heat to loosen them up.

Because these concentrates natural state is more viscous than others, it requires more power to heat these oils. There’s more to it though, oils can be easily burned with too much heat so you’ll also need specifically controlled sweet spot of heat for your concentrates to make them viscous enough to inject into a cartridge but not too hot in damaging the concentrate in the process.

Even once in the cartridge it’s not over. Because a high viscosity oil still needs a proper vape cartridge that can handle heating the concentrate without burning it as well. Oftentimes a higher viscosity oil taste burnt not because of the oil itself, but because the cartridge was cheaply made and couldn’t accurately vaporize the material.

Plastic wick cartridges and older cartridges in general are less equipped to vaporize these oils as compared to new ceramic core and full ceramic carts and pods that are proficient at not burning your oils.

A Cartridge Filling Machine for High Viscosity Oils

This same concept goes for cartridge filling machines. You’re going to want a high quality cartridge filler that can handle high viscosity oils. Ones that can accurately heat and dispense a high viscosity concentrate is necessary for these oils.

That’s why CoolJarz created our own cartridge filling machine that can work with cannabis oils with viscosities as high as honey and dispense them much more easily than any manual cartridge filler.

Many automatic cartridge filling machines lack the power to work with high viscosity oils because they must travel through long tubes or their heating system isn’t up to it. The CoolJarz HotShot 1500 instead uses a short travel valve linking its oil reservoir tank straight to its dispensing needle. This leads to less clogs and you’re able to use thicker oils.

This cartridge filler machine is accurate as it powerful. The HotShot 1500 allows users to dispense shots of concentrate oils in specific increments with a single push of a button. One click and a cartridge can be filled with your desired amount of oil. You can see how this could speed up your cartridge filling process.

Conclusion

The demand for high viscosity oils is likely to continue to grow. Thankfully, our technology in being able to use and consume higher viscosity concentrates and oils continues to become better and more commonplace.

If you’re a cannabis company that is thinking of using higher viscosity oils but does not currently have the proper equipment to fill cartridges, checkout the CoolJarz HotShot 1500 oil cartridge filler machine. If you have any other questions about cartridges or cannabis packaging, Contact Us! We’ll be happy to help!

The Best Cartridge Filler Machine for CBD Hemp Oil

CBD cartridges are vape carts pre-filled with CBD vape juice or commonly said “CBD vape oil” Although, the contents of CBD vape cartridges do not contain any actual oil. Many CBD cartridges use popular 510 threading, meaning they’re compatible with all 510 thread batteries and standard vape pens. However, there are also CBD pods, which are similar to JUULs that have a similar filling process.

Filling cartridges with CBD vape juice is a similar process as distillate oils because they use the same types of carts and pods as THC based oils. For the fastest, and most efficient way to fill your CBD vape juice cartridges, we recommend using either one of CoolJarz HotShot 750 and 1500 cartridge filling machines.

Fill Thousands of CBD Cartridges in a Day

CoolJarz HotShot 1500 was built to help businesses streamline their production operation by making the tedious task of filling 510 cartridges and pods quick and easy. With our cartridge filling machine, you’ll be able to fill thousands of CBD carts a day with a single machine.

How Does the HotShot Cartridge Filler Work?

The HotShot cartridge filler has a semi-automatic design made for speed and precision. We’ve taken the simplicity of hand held cartridge fillers, and the automation of big box fillers and combined them into a better product.

The HotShot has a user interface that allows you to set a specified amount of liquid you wish to disperse from the machines vape-juice tank reservoir. The HotShot 1500 is capable of dispersing anywhere from .33ml to 1.5ml of CBD juice per click of a button. Since most cartridges and pods are usually in sizes of .5ml and 1ml, you can instantly set the cartridge filler machine to these increments for an instantly filled cart with perfect amounts of CBD juice.

Speaking of the button, it’s true, the HotShot 1500 has a handheld button attached to our “Speed Tray” that disperses your CBD as soon as you click on it. Placing your cartridges within the speed tray is also very convenient because you’re able to keep them all in their vendor supplied foam packaging ready for filling.

Also, since the tank is able to hold up to 1 liter of CBD vape juice at a time, you’re not constantly having to refill the machine. Compare that to some cartridge fillers that can only hold 25ml when ours can hold 1000 ml.

Best Filler Machine For Any CBD Vape Cartridge Or Pod

hotshot-1500-cartridge-filler-machine for ccell cartridges

The Hotshot is able to fill vape e-juice cartridges so fast by automating the shot size of each dispense so you only have to tick a button to get the perfect amount of CBD juice within each shot.

The user interface of the HotShot allows for a customized amount dispersed per click. Whether it’s .5ml or 1ml, our cartridge filler gives you the option. You won’t have to worry about whether this machine fits your products because it’s a universal one size fits all.

This means you can use our cartridge filling machine with almost any cartridge size or brand. Whether it’s a .5ml CCell cartridge or a 1ml Liberty X cartridge. CCell TH205’s and CCell TH2’s can all be filled perfectly with the click of a button. That’s not all though, cartridges of different material can also be filled by the A-1o HotShot such as full ceramic cartridges, metal carts, glass, and hybrids.

This cartridge’s fillers automatic measuring system also works with almost any viscosity oil as well. If you have other oils you would also like to fill using this cartridge filler, there won’t be a problem. The HotShot 1500 is capable of working with oils in the viscosity of olive oil, to glycerin, to honey.

Our HotShot 1500 is so powerful, it can even process distillate oils cut as low as 3-percent terps. You’re getting an all-in-one powerhouse of production and speed when you get the HotShot 1500 cartridge filling machine. If you’re looking to fill cartridges with just vape juice, our HotShot 750 can also do the job. This machine is also capable of dispensing vape-juice mixtures with vegetable glycerine (VG) and propylene glycol (PG)

Conclusion

The Best Cartridge Filler Machine for CBD Vape Juice

CBD Vaporizer Cartridges are one of the most popular ways to consume CBD. With new CBD products popping up everyday, we expect wide spread use of CBD vapes only keep growing. Get a CBD e-juice cartridge filler machine that can fill your cartridges quickly and in bulk. If you have cartridges for CBD, there’s no better option on the market than the CoolJarz HotShot Cartridge Filler Machine.

If you have any questions about cartridge filling machines, or cartridge packaging Contact Us! We’ll be happy to answer any questions you have!

What are Live Resin Cartridges?

Live resin is a cannabis concentrate that has quickly gained popularity amongst many vapers and can be the next big thing in cannabis. The process of creating live resin preserves the cannabis plant’s natural terpene profile often loss in the process of drying and curing leading to new experiences in terms of flavor, aroma, and possibly psychoactive effects.

Due to this new popularity, a surge of live resin carts and cartridges have also hit the market. Vaping live resin is the easiest and most convenient way of consuming it and the process is no different from a CO2 cartridge.

How is Live Resin Made?

The process begins by flash freezing freshly harvested cannabis plant matter. This usually happens by either placing it in a freezer containing dry ice or by being slowly dipped into a container filled with liquid nitrogen. The plant matter is kept frozen right until it is ready for extraction. Usually, extraction takes place within 36 hours of the plant material thawing.

Most live resin is extracted using a simple process that is similar to that used to make most other concentrates. Plant material is passed through with a solvent which is then vaporized out of the final product. The main difference is that the solvent is cooled to -40℃/-40℉ for extraction. The final product is also purged of solvents at a much lower temperature than when making other concentrates. (via The Higher Path)

The final product is a concentrate filled with natural flavors, much different from your usual distillate.

Live Resin For Vape Carts

Live Resin vape cartridges are gaining popularity amongst many vape pen users. The combination of high terpene flavors, aroma, and THC levels creates a new overall experience while vaping often referred to as the “entourage effect”. Live Resin cartridges won’t always have the highest THC content but the added attributes more than make up for it for many.

So much so that, live resin cartridges are often sold more expensively than many distillate cartridges. At the moment, live resin cartridges are seen as a luxury item amongst many cannabis connoisseurs due to the unique experience but aren’t much more expensive than other distillate cartridges.

Live Resin Cartridge Filler

Live resin concentrate consistencies are very similar to other concentrates and can come in forms similar everywhere from a thick honey to a solid shatter or badder. The closer to a liquid form, the easier it will be to add into your vape cartridges although they may need to be diluted if too thick.

CoolJarz has a live resin cartridge filler machine that can easily fill live resin with viscosities as high as honey. Known as the HotShot 1500, this cartridge filler machine can fill thousands of live resin cartridges within a single day.

The key to filling live resin is control. With the HotShot 1500, you’ll be able to adjust the temperature of your oil up to 170 degrees Fahrenheit and can easily adjust to lower levels as not to burn your terps and terpenes.

The HotShot is also capable of filling the perfect amount per shot with the click of a button. This allows users to fill about 50 live resin cartridges within 2 minutes. Not bad, and now picture how many you could fill within a single day.

Conclusion

Live resin is a relatively new cannabis byproduct that has definitely become popular amongst users of all kinds due to the unique experience when consuming it. For those who really enjoy the natural flavors and aromas of cannabis, live resin cartridges might be the perfect choice for you.

Filler Machine for Full Ceramic 510 Vape Cartridges

The Best Cartridge Filler Machine for full ceramic cartridges

Full Ceramic cartridges have emerged from the market as an upgrade from also popular, wickless metal cartridges. The benefit to ceramic cartridges is the movement away from metal, which may affect the taste of your oil as well as other concerns one may have with metal cartridges.

Ceramic 510 oil cartridges are filled just like any other 510 cartridge so you’re still going to want a powerful machine that can efficiently produce thousands of cartridge fills in a single day with nearly zero waste. One of the few cartridge filler machines on the market that can do that is the CoolJarz HotShot 1500 oil cartridge filler machine.

Fill Thousands of Ceramic Cartridges a Day

Ceramic cartridges may be the new wave for oil carts so your filler equipment should stay up to date as well. Old oil filler machines are either too slow or malfunction often, wasting material.

The HotShot cartridge filler has a semi-automatic design made for speed and precision. We’ve automated the hard parts of oil filling so you can quickly do the easy ones with less risk of things going wrong.

All you’ll need to do is adjust the settings to the size shot you would like per click, place the cart under the filling needle, and click, your cartridge is filled.

The HotShot also allows users to take the ceramic carts often packaged within Styrofoam blocks and fit them perfectly into our speed tray for quick filling. So quick, you can fill a single cartridge in less than a second with the click of a button.

Any Oil, Any Ceramic Cartridge

The Hotshot’s precision shot sizes are also fully customizable for nearly all common ceramic cartridges. This gives you the option to fill almost exactly how much you want to per click. No more guessing and inaccurate shots!

This cartridge filler can dispense shots from as small as .33ml to as large as 1.5ml as well as anything in-between. Our custom shots feature allows you to adjust how much each tick dispenses in increments as little as .01ml for ultimate accuracy.

This means you can use our cartridge filling machine with almost any ceramic cartridge size. Whether it’s a .5ml Solis cartridge or a 1ml iCell cartridge. These both can be filled perfectly with the click of a button. That’s not all though, cartridges of different material can also be filled by the A-1o HotShot such as metal carts, glass, and hybrids.

This cartridge’s fillers automatic measuring system also works with almost any viscosity distillate as well. The HotShot 1500 is capable of working with oils in the viscosity of olive oil, to glycerin, to honey. Weaker cartridge fillers on the market could never dream of going to viscosities this high.

Our HotShot 1500 is so powerful, it can process distillate oils cut as low as 3-percent terps. You’re getting an all-in-one powerhouse of production and speed when you get the HotShot 1500 cartridge filling machine.

Conclusion

Full Ceramic vaporizer cartridges may be the next thing in the cannabis oil market and we don’t see them going anywhere. Get an oil cartridge filler machine that can fill these popular carts quickly and in bulk. If you have full ceramic cartridges, there’s no better option on the market than the CoolJarz HotShot 1500 Cartridge Filler Machine.

If you have any questions about cartridge filling machines, or cartridge packaging Contact Us! We’ll be happy to answer any questions you have!

The Best Cartridge Filler Machine for CCell Cartridges

CCell Cartridges have become the industry standard in high quality cartridges for many companies’ distillate oils. This is due to the intensive detail they put into creating their carts and pods allowing cannabis companies to use higher viscosity oils in their vape pens.

For these top of the line cartridges you’re going to want to use an oil cartridge filler machine that can effectively disperse these same high or low viscosity oils into them. Luckily, there’s no better CCell cartridge filling machine better than the CoolJarz 1500 semi-automatic oil cartridge filler.

Fill Up Thousands of CCell Cartridges in a Day

Filling CCell Cartridges with a syringe is like putting Regular gasoline in a luxury car. It just doesn’t make sense. Why waste precious resources using ineffective equipment with your products?

The HotShot’s semi manual design allows users to take the CCell carts often packaged within Styrofoam blocks and fit them perfectly into our speed tray for quick filling. So quick, you can fill a single cartridge in less than a second with the click of a button.

Any Oil, Any CCell Cartridge

The Hotshot is able to produce filled CCell cartridges so fast by automating the shot size of each dispense so you just have to click a button to get the perfect amount of distillate within each shot.

Our cartridge filler machine can dispense shots from as small as .33ml to as large as 1.5ml as well as anything in-between. Our custom shots feature allows you to adjust how much each tick dispenses by as little as .01ml for ultimate accuracy.

This means you can use our cartridge filling machine with almost any CCell Cartridge size. Whether it’s a .5ml CCell cartridge or a 1ml Liberty X cartridge. CCell TH205’s and CCell TH2’s can be filled perfectly with the click of a button. That’s not all though, cartridges of different material can also be filled by the A-1o HotShot such as ceramic cartridges, metal carts, glass, and hybrids.

This cartridge’s fillers automatic measuring system also works with almost any viscosity distillate as well. The HotShot 1500 is capable of working with oils in the viscosity of olive oil, to glycerin, to honey. Some cartridge fillers on the market could never dream of going to viscosities that high.

Conclusion

CCell vaporizer cartridges are dominating the cannabis oil market and are expected to for quite a while. Get an oil cartridge filler machine that can fill these popular carts quickly and in bulk. If you have CCell cartridges, there’s no better option on the market than the CoolJarz HotShot 1500 Cartridge Filler Machine.

If you have any questions about cartridge filling machines, or cartridge packaging Contact Us! We’ll be happy to answer any questions you have!

THE BEST CANNABIS OIL FILLING MACHINE FOR VAPE HARDWARE

Oil filling machines are used to fill cartridges for vapes, disposable pens, or carts. They can fill cartridges with oils, distillates, vape juice, CBD extracts and more.

When choosing a distillate oil filling machine, it’s important to find a solution that is fast, efficient, and will allow you streamline your production.

CUSTOMIZATION

For high quality cartridges, a stock syringe filling machine won’t provide the production or precision to match your exact ratios and parameters for your distillate carts, You’ll need a customizable filler that can deliver the exact specification of unit within every dose. This gives speed and consistency while filling pods, and cartridges.

Customization is especially important for oil filling machines. The distillate concentrates industry are beginning to choose cartridge sizes that many fillers aren’t capable of filling at the moment. Luckily, our cartridge filler machine has customizable shot sizes within .01ml increments anywhere from .33ml to 1ml for precision filling.

Manual and automatic oil fillers are both customizable options. However, a semi-automatic cartridge filler may be the best option for companies who would like speed and control of their cartridge filling process.

AUTOMATION

Semi-Automatic filler machines will save you time and money in the production process. These filler machines are more cost effective to use because they provide automation where you most need it, and control where you want. Automation reduces your overhead costs by taking the tediousness out of the equation. This makes your entire operation more profitable because you’re no longer wasting precious time.

Automated cannabis oil filling machines for your vape cartridges removes the concentration needed to fulfill these actions and instead provides ease in use. Each vape cartridge can consistently be filled the same, which allows for a product standard to be set.

One of these semi-automatic cartridge filling machines is fast enough to replace dozens of workers using traditional manual fillers.

The automation of the HotShot’s filling system, mixed with your own pace leads to production levels you never thought possible, leading to an inexpensive cost of production.

Our semi-automatic cartridge filler machines are the best on the market for streamlining your cartridge business, here’s where to get them.

Benefits Of Buying Filling Machines & Vape Hardware From CoolJarz

CoolJarz was able to create a device so in tuned with our customer base only because we are constantly looking to provide solutions to those in the cannabis industry.

COMPATIBILITY

EFFICIENCY

SUPPORT

We’re also one of the most reliable cartridge filler developers on the market. Our HotShot 1500 has a 2 year warranty on all of its aluminum parts as well as a 1 year warranty on all of its electric, and pistons. If you ever were to have any trouble while using your machine, just call. We have a team to help you troubleshoot. Or you can bring your machine in for maintenance. We want our customers know they’re buying more than a product when they work with us.

PURCHASE A CANNABIS OIL FILLING MACHINE FOR VAPE CARTRIDGES

Have any questions about our vape cartridge filler machine or about CoolJarz in general? Contact Us! We’ll be happy to help!